sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Dec 05, 2023

Electroplating Quality Standard-salt Spray Test Standard And Specification

Plastic plating-electroplating quality standard-salt spray test standard and specification.
Huizhou Boluo Tenglong Technology Co., Ltd. serves you wholeheartedly! Mainly engaged in plastic hydroelectroplating processing, with plastic injection molding processing, mold processing and so on!
The salt spray test of electroplated parts means that the electroplating layer mainly plays a decorative appearance and protects the substrate from corrosion.
1. The so-called corrosion of salt spray.
Corrosion is the damage or deterioration of materials or their properties under the action of the environment. Most of the corrosion occurs in the atmospheric environment, which contains corrosion components and corrosion factors such as oxygen, humidity, temperature changes and pollutants. Salt spray corrosion is a common and most destructive atmospheric corrosion. The salt fog here refers to the atmosphere of chloride, and its main corrosion component is the chloride salt in the ocean-sodium chloride, which mainly comes from the ocean and inland saline-alkali areas.
The corrosion of salt spray on the surface of metal materials is caused by the electrochemical reaction between the oxide layer and protective layer of the metal surface and the internal metal. At the same time, chloride ion contains a certain hydration energy, which is easy to be squeezed out by pores and cracks adsorbed on the metal surface and replace the oxygen in the chloride layer, turning the insoluble oxide into soluble chloride and the passivated surface into an active surface. Cause extremely bad adverse reactions to the product.
two.. Salt spray test and its connection with practice.
Salt spray test is a kind of environmental test which mainly uses the artificial simulated salt spray environmental conditions created by salt spray test equipment to assess the corrosion resistance of products or metal materials. It can be divided into two categories, one is natural environmental exposure test, the other is artificial accelerated simulated salt spray environment test. The artificial simulated salt spray environment test is to use a kind of test equipment with a certain volume space-salt spray test chamber, in its volume space to create a salt spray environment to assess the corrosion resistance and quality of the product.
Compared with the natural environment, the salt concentration of chloride in the salt spray environment can be several times or dozens of times that of the general natural environment, which greatly improves the corrosion rate. The salt spray test of the product is also greatly shortened. If a product sample is tested in a natural exposure environment, it may take one year for it to be corroded, while in an artificial simulated salt spray environment, similar results can be obtained only for 24 hours.
3. Scope of application:
1) Copper + nickel + chromium or nickel + chromium plating on the surface of iron and steel.
2) Nickel + chromium plating on copper or copper alloy surface.
3) Nickel + chromium plating on 300 series or 400 series stainless steel.
4) Copper + nickel + chromium plating on the surface of aluminum or aluminum alloy.
5) Copper + Nickel + Chromium plating on Zinc Alloy.
6) plastic electroplated parts.
4. Artificial simulated salt spray tests include.
The main results are as follows: 1) the neutral salt spray test (NSS test) is the earliest and most widely used accelerated corrosion test method. It uses 5% sodium chloride salt solution, and the PH value of the solution is adjusted in the neutral range (6-7) as the solution for spray. The test temperature is 35 ℃, and the sedimentation rate of salt spray is required to be between 1~2ml/ 80 cm ·h.
2) the acetate salt spray test (ASS test) is developed on the basis of the neutral salt spray test. It is to add some glacial acetic acid to the 5% sodium chloride solution, so that the PH value of the solution is reduced to about 3, the solution becomes acidic, and the final salt spray becomes acidic from neutral salt spray. Its corrosion rate is about 3 times faster than that of NSS test.
3) Copper salt accelerated acetate salt spray test (CASS test) is a rapid salt spray corrosion test newly developed abroad. The test temperature is 50 ℃. A small amount of copper salt-copper chloride is added to the salt solution to strongly induce corrosion. Its corrosion rate is about 8 times that of NSS test.
5. Salt spray test standard and determination of test results.
a. A standard is a unified stipulation of repetitive things and summaries. The salt spray test standard is a clear and specific stipulation of the salt spray test conditions, such as temperature, humidity, sodium chloride solution concentration and PH value, etc. in addition, it also puts forward the technical requirements for the performance of the salt spray test box. The salt spray test standard for the same product should be selected according to the characteristics of the salt spray test, the corrosion rate of the metal and the sensitivity to the salt spray.
b. The purpose of salt spray test is to assess the salt spray corrosion resistance quality of products or metal materials, and the judgment of salt spray test results is the judgment of product quality, and whether its result is correct and reasonable is the key to correctly measure the salt fog corrosion resistance quality of products or metals.
c. The judgment methods of salt spray test results are: rating determination method, weighing determination method, corrosion occurrence determination method, corrosion data statistical analysis method.

The main results are as follows: 1) the rating method divides the percentage of the ratio of corrosion area to total area into several grades according to a certain method, and takes a certain level as the basis for qualified judgment, which is suitable for the evaluation of plate samples.
2) the weighing determination method is to evaluate the corrosion resistance quality of the sample by weighing the weight of the sample before and after the corrosion test and calculating the weight of corrosion loss. it is especially suitable for assessing the corrosion resistance quality of a certain metal.
3) the method of determining the occurrence of corrosion is a qualitative method, which is based on the corrosion phenomenon of the product after the salt spray corrosion test. this method is mostly used in general product standards. The statistical analysis method of corrosion data provides a method to design corrosion test, analyze corrosion data and determine the confidence of corrosion data. it is mainly used to analyze and count corrosion, rather than to determine the quality of a specific product.

Send Inquiry