sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

May 10, 2022

Chrome Plating Keeps A Bronze Sword From Breaking For A Thousand Years!

Chrome plating keeps a bronze sword from breaking for a thousand years!


On 1 March 1994, the excavation of the world-famous Terracotta Warriors Pit No. 2, the eighth wonder of the world, began with the discovery of a batch of bronze swords, 86 centimetres in length, with eight prongs on their bodies. The bronze swords, with their dense internal tissues, shiny and smooth bodies, and finely ground edges with no interlocking textures, had been sleeping under the loess for more than 2000 years and were still as bright and sharp as new when they were unearthed. People were amazed at how the bronze swords that had been lying dormant for over 2,000 years did not break.


Through modern scientific methods of testing and analysis, these bronze swords are surprisingly coated with a layer of chromium oxide film about 10 microns thick, which can resist high temperature, wear, heat and corrosion. This is why the bronze swords are still as bright and sharp as new. And chromium is also used in modern industrial production to improve the hardness, corrosion resistance and wear resistance of other metals.


Chromium is a silvery-white metal with slight azure colour and negative electrode potential, but it has strong passivation properties and is quickly passivated in the atmosphere, showing that it has the properties of a noble metal, so chromium plating of steel parts is a cathodic plating layer. The chromium layer in the atmosphere is very stable, can maintain its lustre for a long time, has strong corrosion resistance, in alkali, nitric acid, sulphide, carbonate and organic acids and other corrosive media is also very stable, and chromium layer hardness (900-1100HV), good wear resistance, reflective ability and good heat resistance, in 500 ℃ below the lustre and hardness are not obvious changes, the temperature is greater than 500 ℃ began to oxidation discolouration. It only starts to soften at temperatures greater than 700°C.


High wear resistance: the cavities of the moulds treated with chrome have a significantly better finish than the untreated cavities, effectively reducing the coefficient of friction and increasing the service life of the moulds. Problems such as hair-pulling arising from various reasons during the production of the mould are effectively solved.


Adhesion: Whether the paired material is the difficult-to-process stainless steel, or various other steels or non-ferrous metals, the chrome plating treatment appears to have a better adhesion as long as it is properly treated.


Corrosion resistance: Chromium has a more negative potential than iron, and chromium itself is easy to form a very thin passivated film in the atmosphere, and is stable in a humid atmosphere, retaining its colour for a long time, and is also stable in alkalis, nitric acid, sulphides, carbonates and organic acids and most gases, so it has better corrosion resistance.


Repeatable: The moulds that have been plated can be plated several times before the chrome layer falls off due to the wear and tear of the moulds during long-term use. Repeated plating does not destroy the moulds themselves, but only increases the cost incurred in stripping the original plating layer, the stripping cost for 1t or less is about RMB 500, and the stripping cost for 1-20t is about RMB 6000.


Applicable materials: Various steels with certain carbon content, and hard alloys can form chrome plating layer, such as HT300, SKD11, DC53, Cr12, Cr12MoV/MoCr and GGG70L etc.


Chromium metal has been ranked as one of the most important plating metals and in most cases, the chromium plating is exclusively used as the outermost coating of the part. Without the physical properties provided by the chromium plating, the service life of most parts would be greatly reduced due to wear, corrosion etc. Parts must be replaced or repaired frequently, so chrome plating is becoming more and more widely used in many industrial manufacturing applications.

Send Inquiry