sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Dec 21, 2022

A Brief Introduction To The Process Of Plastic Plating-Fire Plating.

A brief introduction to the process of plastic plating-Fire plating.

The concept of fire plating.
Hot plating, also known as hot-dipping or hot-dipping, is a method of dipping a metal-plated material into other liquid metals or alloys with a lower melting point. The basic feature of this method is that an alloy layer is formed between the matrix metal and the coating metal. Therefore, the hot-dip coating is composed of alloy metal and coating metal. The metal-plated materials are generally steel, cast iron and stainless steel. The low melting point metals used for hot plating are zinc, aluminum, lead, tin and their alloys.
Hot plating process can be divided into two categories: flux method and hydrogen reduction method. Among them, the hydrogen reduction method is mostly used for continuous hot coating of steel strip, and the typical Sendzimir process and the United States-Steel process belong to this kind of process.
The flux method is mainly used for the coating of steel wire and steel structure. In this method, before the steel parts are immersed in the plating pot, the surface of the purified steel parts is coated with a layer of flux. during the immersion plating, the flux layer is decomposed or volatilized by heat, so that the fresh steel surface is exposed to come into direct contact with the molten metal. the coating is formed by reaction and diffusion. In the flux method, there are wet method and dry method. Wet method is an earlier method of use. After the purified steel is dipped with water flux, it is directly dipped into the molten metal without drying, but it needs to be covered with a layer of molten flux on the surface of the molten metal. The dry method is drying after dipping with water flux, removing the moisture from it, and then dipping. Due to the simple dry process and good coating quality, the dry process is used in the hot-dip galvanizing production of most steel structures, while the wet process is gradually eliminated.

Send Inquiry