sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Jan 14, 2022

5 Major Reasons For Insufficient Bonding Of Electroplated Layers

Five major reasons for insufficient bonding of electroplated layers!

As a kind of metal surface protection treatment, electroplating is widely used in the production of various metals because of its irreplaceable advantages in beautifying the appearance of products, enhancing the texture of metals, improving corrosion resistance and wear resistance.

As a result, nickel-iron plating, iron-tin plating, gold-silver plating, aluminum-silver plating, and other plating types have been derived. Although these plating types are different, many manufacturers in the production process are feedback a problem: that is - the bonding force of the plating is not enough, easy to fall off!

Why this phenomenon, according to expert analysis of the reasons is multifaceted.


There are five main reasons.


First, the electroplating solution is contaminated

In the factory electroplating production, due to various reasons, metal oxides, metal impurities, insoluble suspended matter, organic impurities, and other harmful impurities into the electroplating solution, the accumulation of these impurities too much lead to electroplating solution sex and coating quality are affected. Therefore, it is necessary to clean up the impurities and deal with the plating solution regularly.

Second, the substrate pre-treatment is not good

If there is no problem with the plating solution, it may be necessary to check again whether there is a gray layer or liquid residue on the surface of the substrate, as well as other chemical substances. Because the plating is not cleaned up well, it will lightly affect the flatness, corrosion resistance, and bonding of the plating layer, and heavily lead to plating deposition, loose discontinuity, and even plating flaking, which is the loss of the actual use-value of the product. Therefore, to ensure that the plating pre-treatment process is good is also an important work.


Third, the process control is not in place

The control of the process has a vital role in the quality of the electroplating coating. If there is no problem with the plating solution and pre-treatment, it is necessary to check whether there is any problem with the process control. The temperature in the tank, the density of the current, the pH of the potion, the plating time, and other process control must match the product. Therefore, the process control must be accurate.

Fourth, the production schedule is too rushed

A product is often processed and assembled from many parts. As we all know, in order to complete the processing of these parts often need to cross multiple workshops, not coincidentally, electroplating belongs to the last process. As a result, we often see a scene that before the parts come to the plating workshop, the brothers in the assembly workshop are already waiting for the parts to be assembled.

This causes the work schedule to be too tight, and everyone works overtime continuously to meet the deadline in order to complete the task, resulting in the plating time not meeting the process requirements, plus the light of night work affects the inspection, which eventually affects the plating quality.


V. Irrational product design

Product designers and production personnel are two completely different groups of people. The product designers pay more attention to the shape, size, processing accuracy, and other conditions of the product parts in the design of the parts drawing, and do not consider much about the processing technology of the product, let alone the plating process. Therefore, it also brings some unnecessary trouble to the plating work, which also has some influence on the quality of plated products.


Send Inquiry