sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Nov 07, 2023

the secret between electroplating process and electroplating power supply

Plastic plating-the secret between electroplating process and electroplating power supply.
Huizhou Boluo Tenglong Technology Co., Ltd. serves you wholeheartedly! Mainly engaged in plastic hydroelectroplating processing, with plastic injection molding processing, mold processing and so on!
Electroplating belongs to electrolytic machining process, the factors of power supply will have a direct impact on the electroplating process, electroplating power supply plays an important role in the electroplating process. The application of electroplating power supply and low ripple coefficient rectifying power supply in electroplating industry is helpful for colleagues in electroplating industry to choose rectifying power supply, solve electroplating faults and improve electroplating quality.
1. Switching power supply.
Switching power supply has both the advantages of waveform smoothness of silicon rectifier and convenient voltage regulation of silicon controlled rectifier, high current efficiency, minimum volume, thousands of amperes to ten thousand amperes of high power switching power supply has entered the practical stage of production. The frequency of switching power supply has reached audio frequency, so it is easier to realize low ripple output by filtering. And steady current, steady voltage and other functions are easier to achieve. Therefore, switching power supply is the development direction in the future.
2. Basic types of rectifiers.
Silicon rectifier: Silicon rectifier has a long history and mature technology, and is currently the mainstream product of rectifier. All kinds of rectifier circuits obtain pulsating DC, not pure DC. In order to compare the number of pulsating components, it is generally expressed as ripple coefficient. The smaller the value is, the less the AC component is, and the closer it is to pure DC. The fluctuation coefficients of various rectifier circuits are different. The order from large to small is: three-phase half-wave rectifier, three-phase full-wave bridge rectifier or six-phase double anti-star rectifier with balanced reactor. The thyristor uses the ordinary thyristor rectifier to adjust the average DC output by changing the conduction angle of the thyristor. The thyristor outputs discontinuous pulse waves, and its ripple coefficient is controlled by the conduction angle, and the output ripple coefficient is larger than that of the ordinary silicon rectifier circuit.
3. The influence of electroplating power supply on electroplating process.
The waveform of DC power supply has a prominent influence on the quality of electroplating. Among all kinds of electroplating processes, chromium plating is one of the most affected by power waveform. Low ripple DC power supply must be used for chromium plating, otherwise the bright range is narrow and the coating is easy to blossom and gray. When the high efficiency hard chromium plating additive is used, the micro-crack chromium layer is produced, and when the output ripple is too large, the crack is not fine and the distribution is uneven, which can not reach the required number of cracks. Bright copper plating has a rule: from the Hull cell test piece, the higher the cathode current density is, the better the bright flatness of the coating is; the lower the current density is, the worse the bright flatness is. Try to expand the brightness range of the low current density region and reduce the brightness of the high current density region, the uniform brightness is the best. In practice, using the same formula, process conditions and the same brightener, the brightness leveling and brightness range may be quite different, which is closely related to the output ripple coefficient of the DC power supply used.
The requirement of rectifier output ripple coefficient for bright nickel plating is not as high as chromium plating and bright acid copper plating, but it does need to use ordinary low ripple output DC power supply to ensure the quality of bright nickel plating and the quality of subsequent chromium plating. Sulfate bright acid tin plating itself is not easy to be plated, because it is easy to introduce impurities and difficult to deal with (including tetravalent tin ions) in large-scale production, and the allowable temperature range is narrow. At present, most of the brighteners are not ideal. This process also requires the use of low ripple coefficient DC power supply, otherwise there will be similar faults as bright acid copper plating.
Bath temperature rise problem: DC power supply and pulse power supply with large ripple coefficient often accelerate the temperature rise. The larger the ripple coefficient, the larger the harmonic component, which can produce a large amount of ohmic heat and accelerate the bath temperature rise. Smooth DC is beneficial to the low bath temperature. The influence of the load rate of the rectifier on the text wave coefficient: the closer the working current is to the rated current of the rectifier, the smoother the waveform is. When selecting the rectifier, the rated output power supply voltage should be selected according to the process requirements to close to the maximum demand value. Ensure that the output ripple coefficient of the rectifier power supply is always kept at a low value.

Send Inquiry