sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Oct 27, 2023

Some characteristics in the process of plastic plating-Chromium plating

Some characteristics in the process of plastic plating-Chromium plating.
Huizhou Boluo Tenglong Technology Co., Ltd. serves you wholeheartedly! Mainly engaged in plastic hydroelectroplating processing, with plastic injection molding processing, mold processing and so on!
The process of chromium plating not only has something in common with other kinds of plating, but also has many special features:
The main composition of chromium plating electrolyte is not metal chromium salt, but chromic acid with strong oxidizability.
2 the current efficiency is very low, generally 1316%, and the highest can only reach about 23%. Therefore, a large amount of hydrogen is precipitated in the process of chromium plating, bringing out toxic liquid fog, which requires a good suction device and the use of chromium fog inhibitor.
(3) A small amount of additional anions, such as SO42-, F -, SiF62-, etc., must be added to the solution, and a certain amount of trivalent chromium should be maintained in the electrolyte.
(4) the dispersion ability is low, and for parts with complex shapes, pictographic anodes and protective cathodes must be used in order to get good coatings.
(5) the current density used is very high, sometimes tens of times higher than that of ordinary plating. Chromium plating process of the cell voltage is also high, often need to use more than 12 volts of power supply, and other plating species with 6 volts of power supply on it.
(6) the control requirements of temperature and current density are strict, and there is a close cooperation between them. The current density is fixed, the temperature can only change 1 ~ 2 ℃, the temperature is fixed, the current density changes 2~3A/d.
(7) the anode used for chromium plating is not metal chromium, but insoluble anodes such as lead, lead-tin alloy or lead-antimony alloy.
8 because the chromium layer is easy to be passivated, the power outage is not allowed in the electroplating process.
The above points reflect some characteristics of chromium plating production, that is, its particularity. This particularity constitutes the special essence that the chromium plating process is different from other electroplating processes. However, chromium plating is a kind of electroplating, and of course it also has the general law of electroplating. We should start from production practice, gradually study and understand the whole process of chromium plating, understand and master the special and universal laws of chromium plating process, so as to better serve the production.

Send Inquiry