sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Feb 26, 2024

some basic knowledge of electroplating

Plastic plating-some basic knowledge of electroplating.
Huizhou Boluo Tenglong Technology Co., Ltd. serves you wholeheartedly! Mainly engaged in plastic hydroelectroplating processing, with plastic injection molding processing, mold processing and so on!
1 general knowledge of electroplating.
The basic process of surface treatment can be divided into three stages: pre-treatment, intermediate treatment and post-treatment.
1.1 pre-processing.
Before the parts are treated, there are burrs and oil stains in varying degrees, and some of them are seriously corroded, which brings great difficulties to the intermediate treatment and adds additional resistance to the chemical or electrochemical process. sometimes even part of the part or the whole surface can not get a coating or film, but also pollute the electrolyte, affecting the quality of the surface treatment layer. Including deoiling, etching, polishing, sandblowing, local protection, installation and hanging, adding auxiliary electrodes, etc.
1.2 Intermediate processing.
It is the main stage of giving all kinds of expected performance to the parts, and it is the core of surface treatment. The quality of surface treatment mainly depends on the treatment at this stage.
1.3 Post-processing.
It is the auxiliary treatment of the film and coating.
2 basic terminology in the electroplating process.
2.1 dispersion capacity.
Under certain conditions, the ability of a certain solution to make the coating distribution of the electrode (usually the cathode) more uniform than that obtained by the initial current distribution. Also known as uniform plating capacity.
2.2 coverage capacity.
The ability of a plating bath to deposit metal in grooves or deep holes under certain conditions. Also known as deep plating ability.
2.3 anode.
The electrode that can accept the electrons given by the reactant, that is, the electrode at which the oxidation reaction occurs.
2.4 insoluble anode.
An electrode that does not have an anodic dissolution reaction when the current passes through.
2.5 cathode.
The electrode on which the electron is obtained, that is, the electrode at which the reduction reaction takes place.
2.6 current density.
The intensity of the current passing through the electrode per unit area, usually expressed as A/dm2.
2.7 current density range.
The current density range of qualified coating can be obtained.
2.8 current efficiency.
When a unit of electricity is passed on the electrode, the ratio of the actual weight of the product formed by one reaction to its electrochemical equivalent is usually expressed as a percentage.
2.9 negative polarity coating.
A metal coating in which the algebraic value of electrode potential is larger than that of the base metal.
2.10 Anodic coating.
A metal coating in which the algebraic value of electrode potential is smaller than that of the base metal.
2.11 anode slime.
The residue after anodic dissolution under the action of electric current.
2.12 deposition rate.
The thickness of metal deposited on the surface of the part per unit time.
2.13 initial current distribution.
The distribution of current on the electrode surface in the absence of electrode polarization.
2.14 Activation.
The effect of making the passivation state of the metal surface disappear.
2.15 passivation.
The normal dissolution reaction of metal surface is seriously hindered in a certain environment, and the rate of metal dissolution reaction is reduced to a very low rate in a wide range of electrode potential.
2.16 hydrogen embrittlement.
Brittleness caused by the absorption of hydrogen atoms by metals or alloys in the process of etching, deoiling or electroplating.
2.17 PH value.
The negative logarithm of hydrogen ion activity aH +.
2.18 Matrix material.
A material on which metal can be deposited or a film is formed.
2.19 Auxiliary cathode.
In order to eliminate the burr and coke burning in some parts of the plated parts due to the excessive concentration of power lines, an additional cathode of a certain shape is added near this part to consume part of the current, and the additional cathode is the auxiliary cathode.
2.20 Auxiliary anode.
In addition to the anodes normally used in electroplating, an auxiliary anode used to improve the current distribution on the surface of the plated parts.
2.21 electrolysis.
The process by which an electric current passes through an electrolyte solution at the anode and cathode to cause a redox reaction.
2.22 polarization.
When the current passes through the electrode, the electrode potential deviates from the equilibrium potential.
2.23 saponification reaction.
Hydrolysis of oils and oils under alkaline conditions.
2.24 Cathodic polarization.
The phenomenon that the cathode potential deviates from the equilibrium potential and moves to a negative direction when the direct current passes through the electrode.
2.25 slot voltage.
In electrolysis, the total potential difference between the two poles of the electrolytic cell.

Send Inquiry