sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Jan 04, 2024

Quality inspection of plastic water plating-testing instruments and tools

Quality inspection of plastic water plating-testing instruments and tools.
RCA wear resistance tester.
Tools.
RCA tape abrasion tester rca tape abrasion tester.
Testing principle.
1. Taking the special paper tape and the electroplating product layer to be measured as the friction medium, the friction head acts on the friction head with a fixed load, and the friction head is driven by a fixed diameter roller and a constant speed motor to apply force on the sample surface continuously until the surface substrate of the plastic coating is seen or a specific wear degree is reached. The friction resistance of the sample is evaluated by the number of motor rotation displayed by the counter.
two.. For softer software materials to reduce the load needed, two sample fixing methods can be selected, which are suitable for plastic plating surface samples.
3. With lamp magnifying glass to see the wear results of the counter, counting method: GD-7- IBB type with rotary mechanical counter, GD-7-IBB- CC type digital counter (LCD shows that the required number of revolutions can be set).
Operation method.
The main results are as follows: 1. After rolling the unoiled paper or tape and rubbing against the sample, judge the wear effect under a certain number of revolutions.
2. Reduce the load of 55g or 175g for softer materials.
3. A magnifying glass is attached for viewing

Send Inquiry