sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Jan 13, 2024

Principle of plastic electroplating-pickling passivation

Principle of plastic electroplating-pickling passivation.
Huizhou Boluo Tenglong Technology Co., Ltd. serves you wholeheartedly! Mainly engaged in plastic hydroelectroplating processing, with plastic injection molding processing, mold processing and so on!
The phenomenon that the corrosion rate of metal treated by oxidizing medium is significantly lower than that before treatment is called metal passivation. The passivation mechanism can be explained by film theory, that is, passivation is due to the formation of a very thin, compact, good covering film on the metal surface when the metal interacts with the oxidizing medium, which can be firmly attached to the metal surface. This film exists as an independent phase, usually a compound of oxygen and metal. It completely separates the metal from the corrosion medium, preventing the metal from coming into direct contact with the corrosion medium, so that the metal basically stops dissolving. The surface of austenitic stainless steel treated with oxidizing medium can form a passivation film that meets the above requirements, but the passivation film is easy to be destroyed under the action of halogen ions such as Cl -, Br -, F-1 and so on. This is one of the reasons why the Cl-content of the water should not exceed 25ppm if the water stain can not be removed after the hydraulic test of the austenitic stainless steel pressure vessel treated by pickling passivation. In addition, not any metal oxide film can be regarded as a passivation film, for example, the oxide film formed by high temperature oxidation of carbon steel can not be used as a passivation film because it can not meet the requirement of firmly adhering to the metal surface. For austenitic stainless steel, the passivated surface is pickled before passivation in order to ensure the effect of passivation treatment. The whole treatment process is called pickling passivation treatment, referred to as pickling passivation.
In the conventional process of pickling passivation treatment, in order to ensure the quality of pickling passivation, pickling passivation should first consider the way of soaking in pickling passivation solution, and only in the case that it is not convenient to use liquid immersion, the way of brushing acid washing passivation paste should be considered. however, it is not suitable to use acid washing passivation solution. When the pickling passivation solution is used to soak.

Steps:
1. Pretreatment.
Remove the spatter, flux and dust on the weld and base metal surface. To remove oil, it is necessary to use alkali washing or washing liquid to clean the surface with clean water. Acid washing (pool washing) and flushing passivation (pool washing) and flushing strictly control the passivation time to form a good passivation film. After passivation, it is also necessary to rinse thoroughly without residual liquid.
2. Post-processing.
After pickling passivation, some protective measures should be taken on the passivated surface to prevent the destruction of the passive film. The passivated surface shall not come into contact with hard objects (including stainless steel wire and wire brush), welding and polishing are prohibited. Quality inspection of pickling passivation appearance inspection pickling passivation surface should be uniform silver white, there should be no obvious corrosion marks, welds and heat affected zone surfaces shall not have oxidation color, there shall be no uneven color stains.
3. Residual liquid test.
Using phenolphthalein test paper to check the washing degree of the residual liquid on the surface, the pH value is neutral and qualified.
4. Blue dot test.
According to the need, the quality of pickling passivation treatment can also be tested by blue dot test. The basic principle of the blue dot test is that if the surface passivation film is not perfect or there is iron ion contamination, there will be free iron ions.

Send Inquiry