Preparation method and principle of plastic Electroplating-Pearl Nickel coating.
Huizhou Boluo TengPreparation method and principle of plastic Electroplatinglong Technology Co., Ltd. serves you wholeheartedly! Mainly engaged in plastic hydroelectroplating processing, with plastic injection molding processing, mold processing and so on!

The methods of forming the surface of pearl nickel include mechanical method and electroplating method, and the electroplating method can be divided into composite plating method and emulsion method. The mechanical method is to sandblasting or shot peening the substrate to form a concave and uneven surface, and then electroplating. The pearl satin prepared by this method has good effect, but it has some disadvantages, such as high scrap rate, bad working environment, high labor intensity and so on. In the composite plating method, non-conductive particles are added to the basic plating bath, the particles are uniformly dispersed in the bath under strong stirring, and co-deposited with nickel, and the particles are embedded in the coating to form a nickel composite coating. However, due to the pearl satin effect and softness of the composite coating is not very ideal, it has been basically eliminated.

At present, emulsifier method is the most common method to prepare pearl nickel coating, and it is also the most active research direction. The organic surfactant added to the plating bath can form an emulsion in the plating bath under suitable technological conditions, and the small emulsion droplets can be uniformly dispersed in the plating bath. Under the action of the electric field, the positively charged latex droplets move to the cathode and adsorb at the cathode, which is shielded by the emulsion droplets and can not deposit metal, so that a concave hole is formed in this part. The adsorption and desorption of emulsion droplets on the cathode surface are carried out alternately, and the electrodeposition of metals on the electrode surface is also carried out alternately, resulting in the formation of numerous overlapping circular cavities on the surface of the coating. according to the size of its average diameter, pearlescent coatings with different effects can be obtained.







