Plastic plating-Zinc-Chromium Film Technology.
Huizhou Boluo Tenglong Technology Co., Ltd. serves you wholeheartedly! Mainly engaged in plastic hydroelectroplating processing, with plastic injection molding processing, mold processing and so on!
1 about electroplating technology.
Electroplating refers to the salt solution containing the metal to be plated. Using the metal to be plated as the anode, the cations to be plated in the plating bath are deposited on the substrate surface by electrolysis to form a coating. The two main problems in electroplating process are hydrogen embrittlement and serious harm to the environment. There are two views on the way hydrogen invades the matrix in the process of electroplating. One is that oxygen mainly enters the substrate in the early stage of electroplating, while the other is that hydrogen is first contained in the hydrogen trap of the coating during electrodeposition, and then gradually diffuses into the substrate. The presence of hydrogen in the metal matrix will cause stress, and stress corrosion will often cause catastrophic accidents, endangering the safety of people and property. In the whole process of electroplating, the waste gas, waste water and waste residue have a great impact on the environment. It is estimated that about 600 million tons of waste water, 50 000 tons of waste residue and 50 million m ~ 3 of acid fog are discharged by electroplating every year. Among them, the electroplating waste liquid and waste water have a great impact on the environment. With the continuous enhancement of people's awareness of environmental protection, it is conceivable that people pay more and more attention to the serious pollution of traditional electroplating. People hope to have a new type of coating which can save resources, has better anti-corrosion performance than galvanized coating, and does not pollute the environment.
2) Passivation: usually passivation only forms a very thin passivation film on the surface to be treated, but in Dacro treatment solution, zinc powder, aluminum powder and chromic acid react with chromic acid. After coating and baking, layers of zinc powder, aluminum powder and amorphous chromic acid are added to form a multi-layer passivation film. This passivation is a comprehensive passivation of zinc, aluminum and matrix metals in the whole coating.
3) Cathodic protection: the electrode potential of zinc and aluminum is much smaller than that of iron. When the coating is partially damaged or immersed in a corrosive medium, zinc and aluminum as the anode of the corrosion microbattery lose electrons and are corroded, and the matrix metal is completely protected as the cathode.
2.2 performance characteristics of Zn-Cr film.
1) thin coating: the thickness of zinc-chromium film coating is usually lO-14 microns.
2) No hydrogen embrittlement: acid pickling is not used in the coating process, which avoids the occurrence of hydrogen embrittlement.
3) good heat resistance and can be used up to 300 ℃.
4) it does not pollute the environment, and the cleanliness of the workpiece is high, so it is a kind of green environmental protection process.
5) excellent anti-corrosion performance, and its corrosion resistance is usually 10 times higher than that of traditional plating.
6) Composite coating can be carried out.
7) excellent permeability and deep plating ability.
2.3 Zinc-chromium film treatment process.
The zinc-chromium film coating process is generally basket-cage type and hanging type. The coating is divided into soaking and spraying, which usually goes through two times of coating and two times of roasting.
The process is as follows:
1) pre-treatment, general deoiling with shot blasting, sandblasting.
2) apply the workpiece for the first time, soak the workpiece in the coating liquid, and then shake it centrifugally to remove the excess droplets.
3) in the first roasting, preheat between 70ml and 80% for 15 minutes, heat it to 300 ℃ with the furnace and keep for half an hour.
4) the second coating (the same process as the first coating).
5) the second roasting (same as the first roasting process).
3 Prospect.
Zinc-chromium film technology is being paid more and more attention by the metal surface treatment industry at home and abroad because of its excellent film performance and environment-friendliness, although its coating cost is still high compared with traditional electroplating, but its great development prospect can be predicted.
2 about zinc-chromium film.
Zinc-chromium film, also known as Dacromet (English name Dacro), is a kind of flake zinc-aluminum chromium salt protective coating, a new technology of metal anticorrosion and a high and new technology of surface treatment in the world. Because its whole process adopts the whole process of closed-circuit coating, so it has the characteristics of complete control of the pollutants produced in the production process, so zinc-chromium film is recognized as environmental protection products and green products.
2.1 anticorrosion mechanism.
1) shielding effect: between the metal particles and exposed to the outside of the metal is a complex compound including chromium oxide and zinc and aluminum oxide, which has good stability in neutral corrosion medium and can play an isolated shielding effect.
Dec 21, 2023
Plastic plating-Zinc-Chromium Film Technology
Send Inquiry
Product Categories
Latest Products






