sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Aug 24, 2023

Plastic plating-functional application of plastic plating

Plastic plating-functional application of plastic plating.
Huizhou Boluo Tenglong Technology Co., Ltd. serves you wholeheartedly! Mainly engaged in plastic hydroelectroplating processing, with plastic injection molding processing, mold processing and so on! .
The functional application of plastic plating in electronic products is more important than decorative application. Because plastic products are light in weight and easy to process and shape, it is of great significance to improve the production efficiency of electronic products, save metals, reduce costs and improve efficiency and function.

The electronic products that can make use of plastic electroplating technology include electrical function, mechanical function and other functions.

(1) Electrical function class.

Shielding of high frequency electrical appliances.

Printing hole metallization.

Fuel meter electrode.

Non-eddy current switch.

Radio wave reflector.

Circuit board.

(2) Mechanical function class.

Rack, base, substrate.

Gear, rack, transmission mechanism.

Shell, cover plate.

Special standard parts.

(3) other functional selective transmitters.

Plastic products needed for welding and grounding.

Special coating products required for surface performance.

The functional requirements of electronic products are mostly related to electron transmission, radio wave transmission, magnetic conduction, conductivity and so on. In the past, these functions are realized by metal products, but in the case of microelectronics, especially in the case of radio wave transmission, radio waves are often transmitted on the surface, as long as the properties of surface-related metals are given, the desired functional purpose can be achieved. this provides a space for the application of non-metallic electroplating products in electronic products. For example, there is a skin effect in microwave transmission, that is, in microwave devices, especially in waveguides, microwave only travels between the surface of the conductor and the space; on the other hand, the transmission loss in the process of microwave transmission is also very sensitive, so it is better to make waveguides from highly conductive materials, such as metallic silver. If all the metal silver is used to make waveguides, the cost will be staggering, so in fact, all waveguides are made of copper or aluminum, and the surface is plated with silver. At this time, if plastic is used to make waveguides, microwave transmission can also be completed after silver plating on the surface. For example, it has long been tried to use polyurethane plastic silver plating to make light waveguides and antennas. Of course, for high-power microwave devices, the key is to improve the heat resistance of plastics, because in the case of high power, there will be a higher thermal effect in the process of microwave transmission. It is believed that with the progress of polymer material technology, such a problem is not difficult to solve.

In addition to the application of electronic products, it also has a wide application prospect in electrical products, especially in the field of automotive electronics. For example, the earliest plastic parts used in automobiles are switches and sockets, mainly made of nylon, polyester and acetic acid resin. In automobiles, switches and sockets are required not only for practicality, but also for appearance. Although metal can be made into the same product, it is heavier and requires fine polishing to achieve the low-friction surface required for switch smooth operation. Switches or converters are also used in car bonnets, while electronic switches that prevent cars from starting normally are usually in the gearbox and soaked in hot oil.

Like light sockets, car sockets are made of high-performance plastics such as PPA, PPS and SPS. These materials will not degrade even if they are exposed to high temperature for a long time. The light weight and corrosion resistance of these materials make them ideal substitutes for metal applications in some aspects, but when safe grounding is needed, the shortcomings of plastics appear. In this case, the application of plastic electroplating technology is the best solution.

Send Inquiry