Plastic plating-factors affecting the quality of plating layer.
Huizhou Boluo Tenglong Technology Co., Ltd. serves you wholeheartedly! Mainly engaged in plastic hydroelectroplating processing, with plastic injection molding processing, mold processing and so on!
The quality of electroplated parts directly affects the overall quality of the equipment. The factors that affect the quality of electroplating include internal and external factors. Therefore, we should not only have a comprehensive understanding of the internal factors that affect the electroplating quality, but also the external factors that affect the electroplating quality can not be ignored, strictly control each link in order to ensure the electroplating quality.
The factors that affect the quality of electroplating include internal and external factors.
I. Internal factors.
The strict quality management in the electroplating workshop is a strong guarantee for the quality of electroplated parts. In order to fundamentally improve the electroplating quality and obtain high quality coating, we should have a comprehensive understanding of every internal link that affects the electroplating quality.
(I) pre-treatment factors.
The adhesion, anti-corrosion performance and appearance quality between the coating and the substrate are directly related to the surface treatment of the parts before plating. The dirt such as oil, rust and oxide scale attached to the surface of the parts is the intermediate obstacle that hinders the full contact between the plating solution and the metal substrate, on which it is impossible to form a qualified electrocoating. When the extremely thin oil film and oxide film are attached to the plating parts, although the coating with normal appearance and fine crystallization is obtained, the bonding strength is greatly reduced.
Therefore, the pre-treatment of the parts is a prerequisite for the whole electroplating process to obtain good results. First of all, the concentration and purity of the deoiling and pickling solution must be ensured, and the floating oil in the solution should be cleaned up in time; secondly, when the impurities in the rust removal solution reach a certain amount, it will affect the quality of the coating, so it should be replaced regularly.
(2) factors of electroplating solution.
In electroplating production, due to various reasons, all kinds of harmful impurities enter the electroplating solution. There are many kinds of impurities, including metal impurities, metal oxides, non-metallic impurities and all kinds of insoluble suspended solids, organic impurities and so on. The kinds of impurities in different plating baths are different, and the tolerance of the same kind of impurities is also different. When one or more harmful impurities accumulate to a certain extent, it will affect the performance of the bath and the quality of the coating, so we can not wait for the accumulation of impurities to cause harm before dealing with the plating bath. In addition, the content of each component of the electroplating solution has an optimal process range, and the bath solution should be tested and analyzed regularly to ensure that the components are within the process range; at the same time, according to the production task, practical experience and test results, before impurities accumulate that may affect the quality of the electroplating layer, purify the electroplating solution to ensure the stability of the electroplating solution.
(3) controlling factors of process conditions.
The control of process conditions directly affects the quality of the coating. Only by mastering and controlling the process conditions of each kind of plating, can the high quality coating be obtained. The process conditions such as temperature, current density, pH value and plating time must be matched. For example, in hard chromium plating, the improper coordination of temperature and current density has a great influence on the cathodic current efficiency, dispersion ability, hardness and brightness of chromium plating solution. As shown in the following figure, when the temperature is high, it is necessary to increase the current density in order to obtain the desired coating. The two restrict each other, change one, and the other must change with it. Therefore, if the process conditions are not well controlled, electroplating quality accidents will occur.
Nov 08, 2023
Plastic plating-factors affecting the quality of plating layer
Previous
Send Inquiry
Product Categories
Latest Products






