sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Aug 17, 2023

Plastic plating-electroless nickel plating solution-complexing agent

Plastic plating-electroless nickel plating solution-complexing agent.
Huizhou Boluo Tenglong Technology Co., Ltd. serves you wholeheartedly! Mainly engaged in plastic hydroelectroplating processing, with plastic injection molding processing, mold processing and so on! .

Complexing agent.

In addition to the main salt and reducing agent, the most important component of electroless nickel plating solution is the complexing agent. The difference of bath performance and the length of service life are mainly determined by the selection of complexing agent and its collocation relationship. The first function of complexing agent is to prevent the precipitation of the bath, increase the stability of the bath and prolong the service life. If there is no complexing agent, light green flocculent hydrous nickel hydroxide precipitates can be precipitated in acid bath because of the low solubility of nickel hydroxide. Nickel sulfate dissolves in water to form nickel hexahydrate ion, which tends to be hydrolyzed and acidic after hydrolysis, and then hydroxide precipitates. If there are some complexing agent molecules in nickel hexahydrate, it can obviously improve its anti-hydrolysis ability, and may even exist in the form of nickel ion in alkaline environment. However, with the increase of pH value, the water molecules in nickel hexahydrate will be replaced by OH, which aggravates the hydrolysis. In order to completely inhibit the hydrolysis reaction, nickel ions must be chelated to obtain the maximum stability of inhibition hydrolysis. There are more phosphate ions in the plating bath, but because of the high solubility of nickel hypophosphite, it generally does not precipitate. In the later stage of the use of the bath, the phosphite in the solution accumulates and the concentration increases, so it is easy to precipitate white NiHPO3.6H2O precipitation. After the addition of complexing agent, the concentration of free nickel ion in the solution decreased greatly, which could inhibit the precipitation of nickel phosphite in the later stage of the bath. The second function of complexing agent is to improve the deposition rate. After adding complexing agent, there are a lot of data about the increase of deposition rate. The addition of complexing agent can greatly reduce the concentration of free nickel ions in the plating bath, and it is impossible to increase the reaction rate by reducing the concentration of reactants according to the law of mass action, so this problem can only be explained from the point of view of kinetics. To put it simply, after the organic additive is adsorbed on the workpiece surface, it improves its activity and provides more activation energy for hypophosphite to release active atomic hydrogen, thus increasing the rate of deposition reaction. The complexing agent also acts as an accelerator here.

There are many complexing agents that can be used in electroless nickel plating, but the complexing agents used in electroless nickel plating solution require that they have large solubility, a large range of pH stored in the solution can be consistent with the requirements of electroless plating process, and have a certain reaction activity, so the price factor can not be ignored. At present, the commonly used complexing agents are some aliphatic carboxylic acids and their substituted derivatives, such as succinic acid, citric acid, lactic acid, malic acid and glycine, or their salts. Pyrophosphate, citrate and ammonium salt are used in alkali bath. Unsaturated fatty acids are rarely used because unsaturated hydrocarbons absorb hydrogen atoms when they are saturated, reducing the utilization of reducing agents. The common monocarboxylic acids such as formic acid and acetic acid are rarely used. Acetic acid is commonly used as a buffer and propionic acid is used as an accelerator.

Send Inquiry