Plastic plating-A brief introduction to the electroplating process of plastic products (water plating and vacuum plating).
Huizhou Boluo Tenglong Technology Co., Ltd. serves you wholeheartedly! Mainly engaged in plastic hydroelectroplating processing, with plastic injection molding processing, mold processing and so on!
There are two common electroplating processes for plastic products: water electroplating and vacuum ion plating.
1. Water electroplating:
Generally suitable for ABS material, ABS+PC material products. The main process is to put the products that need electroplating into the electroless plating solution for electroplating. According to the different needs of customers, can be plated into different colors, with highlight silver, sub-silver, gray silver. Because the conductivity of the electroplated product is significantly enhanced, what about some parts that need to be insulated? There are two ways: first, apply insulating oil to the parts that need to be insulated, so that the parts will not be electroplated when electroplating, so as to achieve the insulation effect! Of course, the part coated with insulating oil will turn black, so it is not suitable for appearance. Second, the parts that need electroplating are pasted with special adhesive tape and protected, so as to achieve the effect of insulation.
2. Vacuum ion plating, also known as vacuum coating:
Generally applicable to a wide range of products, such as ABS material, ABS+PC material, PC material. At the same time, because of its complex technological process, high requirements of environment and equipment, the unit price is more expensive than that of hydropower plating. This paper briefly introduces its technological process: product surface cleaning, static electricity removal-- spray primer-- > baking primer-- > vacuum coating-- > spray paint-- > baking topcoat-- > packaging.
Vacuum plating can be divided into general vacuum plating, UV vacuum plating, vacuum plating special; the process includes evaporation, sputtering, gun color and so on.
3. The difference between the two processes:
Because of its simple process and less stringent requirements from equipment to environment, hydroelectric plating is widely used. It is easy to find such suppliers in Dongguan. There are not many excellent suppliers of vacuum plating in Dongguan and Shenzhen, at least I don't have much information about such suppliers at present. However, there is a weakness in hydroelectric plating, which can only be plated with ABS material and ABS+PC material (the effect of this material is not very ideal). However, the temperature resistance of ABS material is only 80 ℃, which limits its application range. However, vacuum plating can reach about 200 ℃, which can be electroplated for parts used at high temperature. Such as tuyere, tuyere ring using PC material, these parts are required to withstand the high temperature of 130C. In addition, the general requirements of high-temperature parts, vacuum plating must be sprayed in the last layer of UV oil, so that the product surface is glossy, high-temperature resistance, while ensuring adhesion.
4. the advantages and disadvantages of the two processes:
A, to put it simply, such as vacuum plating but UV oil, its adhesion is very poor, can not pass 100 TEST, and water plating is obviously better than vacuum plating! Therefore, in order to ensure the adhesion of vacuum plating, it is necessary to carry out special spraying treatment, and the cost is certainly higher.
B, the color of hydroplating is relatively monotonous, generally there are only a few kinds of bright silver and Asian silver, and there is nothing we can do about the various colors such as flash silver, magic blue, crack, dripping silver and so on. However, vacuum plating can solve the problem of seven colors.
C, the general coating material of hydroelectric plating is "hexavalent chromium", which is a non-environmentally friendly material. There are the following requirements for "hexavalent chromium":
Some domestic manufacturers have begun to try to use "trivalent chromium" to replace "hexavalent chromium", while vacuum plating uses a wide range of coating materials, which is easy to meet the requirements of environmental protection.
Nov 13, 2023
Plastic plating-A brief introduction to the electroplating process of plastic products (water plating and vacuum plating)
Send Inquiry
Product Categories
Latest Products






