sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Jul 06, 2024

Plastic electroplating-Five methods for local hard chromium plating

Plastic electroplating-Five methods for local hard chromium plating

Huizhou City Boluo Tenglong Technology Co., Ltd. wholeheartedly serves you! Mainly engaged in plastic water electroplating processing, accompanying plastic injection molding processing, mold processing and so on!

(1)Insulation method: That is, wrap the non-plated parts with insulating material to achieve the purpose of local plating. These insulating materials include the use of plastic sheeting, insulating tape, insulating paint, etc.

(2)Copying fixture method: For example, when the scale line part of a stainless steel vernier caliper is locally plated, a copying fixture with only the scale line part exposed can be made from acid-resistant and alkali-resistant polypropylene plastic. If cathodic protection is done, local chromium plating can be carried out. There are also many parts that can be made into profiling jigs, and chromium can be plated as long as the plated parts are exposed.

(3)Shielding method: In hard chromium plating, shaft parts often have thick ends and thin middle. In order to achieve the uniformity of the coating, plastic plates can be used to block both ends of the anode respectively. Several holes should be made on the plastic plate to make the solution partially convective, so that the dense areas of power lines at both ends of the shaft will shield part of it, allowing the power lines to bypass the plastic plate, so that the middle part of the parts will be more concentrated, and the deposited coating will be more uniform.

(4)Segmented method: Some parts have different uses and different thicknesses of chrome plating, so you can use the segmented method for electroplating. When a section reaches thickness, lift the part out of the slot, insulate the section, and then continue to plate other parts until all plating is completed.

(5)Brush plating method: For large and difficult parts that require local chrome plating, it is best to use brush plating method to solve the problem. Because brush plating does not require a plating bath and can be operated outdoors, chromium plating is deposited quickly and is pollution-free, making it especially suitable for local chromium plating or local restoration work.

Send Inquiry