Plastic Electroplating—A Necessary Accessories for Electroplating Tanks
The accessories that must be equipped with the electroplating tank include anodes and anode baskets or anode hooks, electrode rods, power cables, etc. In order to save investment, some factories do not need anode baskets, and they can directly hang the anodes into the plating tank with hooks, but at least they must be covered with anode sleeves.
Most of the anode baskets are made of titanium material, and a few types of plating can also be made of stainless steel or steel.
Electrode rods are conductive rods used to suspend the anode and cathode and connect to the power source. Usually made of copper rod or brass rod, slightly longer than the plating tank, the diameter is determined according to the current, but at least 5cm or more.
The key to the power connection line is to ensure that the required current can be passed through. It is best to use red copper plate, and multi-strand cables are also useful. At this time, it must meet the requirements of its cross-sectional area.






