Management and maintenance of plastic plating-Chromium plating

Management and maintenance of plastic plating-Chromium plating.
Huizhou Boluo Tenglong Technology Co., Ltd. serves you wholeheartedly! Mainly engaged in plastic hydroelectroplating processing, with plastic injection molding processing, mold processing and so on!
I. every day.
1. Fill the bath with bath.
two。. Stir the bath thoroughly with low pressure air.
3. Check the temperature controller, the silk temperature is in the normal range.
4. Check the rack and repair it.
5. Use the maximum Ningliu 15 chalk J for 30 minutes to purify and dissolve.
6. Harrington's trough test.
2. Weekly.
1. Evaporative concentration and recovery of chromium plating solution is poured back into the bath.
two。. Check the content of the catalyst and supplement the need.
3. Every month.
1. Check the gold screen impurities in the bath (Zn, Fe, Cu, Nj).
two。. Clean and clean the anode.
3. Check the trivalent chromium content.
IV. Every year.
1. Check the ammeter and ampere hour meter.
two。. Check and correct the temperature controller.
3. Clean and repair all facilities outside the trough.
4. Renovate the ventilation hood and transportation pipeline.
5. Clear the plating bath, remove the mud, clean, inspect and repair the bath, heating tube and conductive rod head. Anode finishing and replacement.