Plastic plating-.
Introduction of electroplating processing technology and sharing to make electroplating a bright spot in product processing.
Huizhou Boluo Tenglong Technology Co., Ltd. serves you wholeheartedly! Mainly engaged in plastic hydroelectroplating processing, with plastic injection molding processing, mold processing and so on!
With the development of electroplating technology today, it has become a very important modern product surface treatment technology, which has long been not only a means of metal surface protection and decorative processing for related electronic consumption and hardware products and plastic products, although protection and decorative electroplating still account for a large proportion of electroplating processing. The functional uses of electroplating are more and more extensive. In particular, functional electroplating technology is widely used in the electronic industry, communications, military industry, aerospace and other fields. Electroplating can not only produce beautiful metal coatings, but also produce a variety of binary alloys, ternary alloys and even quaternary alloys; it can also make composite coatings and nano-materials; it can be electroplated on metal materials or non-metallic materials. The industrialization of these technologies is inseparable from the application of electroplating additive technology and new electroplating material technology in electroplating bath formulation technology.
Introduction of common electroplating techniques:
1. Non-cyanide alkaline bright copper can be pre-plated and thickened on copper alloy in one step, and the thickness of the coating can reach more than 10 μ m, which is as bright as acidic bright copper coating. If it is blackened, it can achieve pitch black effect. It has been in normal operation in 10,000 liter tank for two years. two.. The common type of cyanide-free bright silver plating uses thiosulfate as the main complexing agent, and the advanced type uses sulfur-free organic compounds as the main complexing agent. The thickness of the full bright coating can reach more than 40 μ m, the surface resistance of the coating is ~ 41 μ Ω', the hardness is ~ HV101.4, and the thermal shock is up to 250 ℃, which is very close to the performance of silver cyanide plating. 3. The main salt of cyanide-free self-catalytic electroless gold plating is Na3 [au (SO3) 2]. The thickness of the gold layer can reach 1.5 μ m. It has been used for gold plating on high density flexible circuit boards and electronic ceramics. 4. Non-formaldehyde self-catalytic electroless copper plating is used for through-hole plating and non-conductor surface metallization of circuit boards. At present, there are no commercial products at home and abroad to remove toxic formaldehyde and replace it with cheap non-toxic hypophosphite. The laboratory research has been basically completed, the deposition rate is 3 ~ 4 μ m / h, the service life is more than 10 cycles (MTO), and the coating is compact and bright. But it needs to be further improved and tested in the pilot test. 5. Pure palladium electroplating Ni will cause dermatitis, the European Union has long refused to import jewelry containing Ni, palladium is the best substitute for Ni metal. The project was completed in 1997, including two processes, one is thin palladium plating with a thickness of 0.1 ~ 0.2 μ m, which has been used as anti-corrosion decorative coating and anti-silver discoloration layer on white copper tin, and the other is thick palladium plating with a thickness of 3 μ m crack-free (current international level). Because palladium is expensive, it has not yet entered the domestic market. 6. Trivalent chromium-zinc coating blue-white and color passivator use trivalent chromium salt instead of carcinogenic hexavalent chromium salt. Blue-white passivation color, such as chromium plating, has been tested by neutral salt spray for more than 26 hours and has been tested in the market for ten years. The laboratory study of color passivation has been completed, and the color is bright, but it needs to be tested in a pilot test. 7. The main salt of pure gold electroplating is K [Au (CN) 2], which belongs to micro-cyanide process. The purity of gold coating is 99.99%, the bonding strength of gold wire (30 μ m) is more than 5g, and the shear strength of solder ball (25 μ m) is > 1.2Kg. Knoop hardness H < 90 has been used for gold plating of high density flexible circuit boards. 8. There are two kinds of electroplated Pd _ (60) Ni _ (40) and Pd _ (80) Ni _ (20) in Baigang, which have been used as substitute gold coating and anti-silver discoloration layer in electronic products. 9. Other electroplating processing technology precious metal gold, silver, palladium recovery technology; diamond mosaic plating technology; stainless steel electrochemical and chemical polishing technology; textile copper plating, nickel plating technology; hard gold (Au-Co,Au-Ni) plating; palladium-cobalt alloy plating; gun black Sn-Ni plating; electroless gold plating; pure gold immersion plating; electroless silver deposition; electroless tin deposition.
Apr 26, 2024
Introduction of electroplating processing technology and sharing to make electroplating a bright spot in product processing
Send Inquiry
Product Categories
Latest Products






