sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Dec 05, 2024

Electroplating-Conditions related to electroplated layers

Electroplating-Conditions related to electroplated layers

Huizhou City Boluo Tenglong Technology Co., Ltd. wholeheartedly serves you! Mainly engaged in plastic water electroplating processing, accompanying plastic injection molding processing, mold processing and so on!

1. There should be good adhesion between the coating and the base metal, between the coating and the coating.

2. The coating should be finely crystallized, smooth and uniform in thickness.

3. The coating should have the specified thickness and have as few porosity as possible.

4. The coating should have the specified indicators, such as brightness, hardness, conductivity, etc.

5. The plating time and the temperature of the plating process determine the thickness of the coating.

6. The ambient temperature is-10℃~60℃;

7. Input voltage is 220V±22V or 380V±38V;

8. The maximum operating noise of water treatment equipment should not exceed 80dB(A).

9. Relative humidity (RH) should not exceed 95%;

10. The COD content of raw water is 100mg/L~150000mg/L.

Send Inquiry