sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Sep 10, 2021

Detailed process of injection molding

plastic injection molding is a method of injection and molding, also known as injected molding.


Detailed process:


The first is the mold clamping process: the pressure oil in the mold clamping cylinder pushes the clamping mechanism to move, and the movable template moves to close the mold.


The second step of the injection device: after the mold is locked by the clamping force during the injection process, the injection device enters the working condition to make the nozzle and the mold fit.


The third step of the pressure holding process: during the process of filling the mold cavity until the melt is filled, the screw is required to maintain a certain pressure on the melt to prevent the melt in the mold from flowing back.


The fourth step of cooling and pre-plasticizing process: once the gate is sealed, the pressure holding process is cancelled, and the product is naturally cooled and shaped in the mold; at the same time, the Dakumar injection molding machine drives the pre-plasticizing oil motor to rotate the screw to remove the granular form from the hopper The plastic is transported forward for plasticization.


Step 5: The injection device retreat, mold opening and plastic product ejection process: after the pre-plastic metering and anti-delay process, in order to prevent the nozzle from forming cold material due to long-term contact with the cold mold, it is usually necessary to withdraw the nozzle from the mold , That is, enter the retreat mode of the injection device.


Injection molding, also known as injection molding, is a molding method that combines injection and molding. The advantages of injection molding method are fast production speed, high efficiency, operation can be automated, variety of designs and colors, shapes can be from simple to complex, sizes can be from large to small, and the product size is accurate, the product is easy to update, and it can be made into complex shapes. Parts and injection molding are suitable for mass production and molding processing fields such as products with complex shapes.


At a certain temperature, the completely melted plastic material is stirred by a screw, injected into the mold cavity with high pressure, and cooled and solidified to obtain a molded product. This method is suitable for mass production of parts with complex shapes and is one of the important processing methods.


Send Inquiry