sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Sep 15, 2023

Characteristics and Application of plastic Electroplating-Chromium plating

Characteristics and Application of plastic Electroplating-Chromium plating.
Huizhou Boluo Tenglong Technology Co., Ltd. serves you wholeheartedly! Mainly engaged in plastic hydroelectroplating processing, with plastic injection molding processing, mold processing and so on!
The electroplated chromium coating has a beautiful color, which is light blue and silvery white, and the electrode potential of chromium is very negative (the standard electrode potential is-0. However, due to the strong passivation ability of metal chromium, it is easy to form a very thin oxide film on the surface of chromium coating in air, which makes the chromium coating have better corrosion resistance. For iron and steel substrate, chromium plating layer belongs to negative polarity coating.
According to the purpose, electroplated chromium coating can be divided into two categories: protective-decorative chromium coating and functional chromium coating, as well as black chromium coating and loose hole chromium coating. Protective-decorative chromium coating mainly has non-crack chromium coating, micro-crack chromium coating and microporous chromium coating, which can be used on some bright accessories; functional chromium coating mainly refers to hard chromium coating, which is mainly used for parts with high wear resistance and hardness; black chromium plating layer can prevent reflection; a large number of microholes on the surface of loose hole chromium plating layer can absorb lubricating oil to reduce wear and friction, and can be used as antifriction coating.
According to the valence state of chromium in the plating solution, the electroplated chromium coating can be divided into hexavalent chromium coating and trivalent chromium coating. The hexavalent chromium coating is bright, high hardness (800mm ~ 1000HV), good wear resistance and corrosion resistance, and has high chemical stability in air, acid, alkali and other media. However, hexavalent chromium coating has some defects that can not be ignored, for example, hexavalent chromium coating has poor corrosion resistance in the medium containing F -, Cl-and other halogen ions, and sharp oxidation reaction will occur at high temperature above 600C; the cathodic current efficiency of hexavalent chromium plating is very low, only 8% ~ 18%, and hydrogen evolution is serious, resulting in a lot of acid fog in the plating workshop, which does great harm to the environment and human body. The dispersion and covering ability of hexavalent chromium plating bath is poor, so pictographic anodes and auxiliary cathodes are often needed in production. In addition, Cr6 + contained in hexavalent chromium plating bath is toxic, which will cause serious harm to the health of operators. At the same time, the waste water and waste gas containing Cr6 + discharged in the production process will also seriously damage the environment and ecological balance.
The color of trivalent chromium coating is slightly darker than that of hexavalent chromium coating, similar to that of stainless steel. Trivalent chromium coating has good mechanical properties, wear resistance is better than hexavalent chromium, and the dispersion and covering ability of trivalent chromium plating bath is much higher than that of hexavalent chromium plating bath, and the current efficiency is higher (generally higher than 30%). However, the thickness of the plating bath is poor, the thickness of the coating is difficult to exceed 5 μ m, and the hardness and corrosion resistance are lower than that of hexavalent chromium plating. In particular, the composition of trivalent chromium plating bath is complex, the sensitivity to impurities is relatively high, and it is difficult to operate and control. In the process of trivalent chromium plating, Cr3 + near the anode is easy to be oxidized to Cr6 +, while Cr6 + is a sensitive impurity in trivalent chromium plating bath. A small amount of Cr6 + will lead to serious leakage in the low current density region of trivalent chromium plating. When the concentration of Cr6 + is too high, the coating obtained in the high current density region will have no luster. Although the toxicity of Cr3 + is significantly lower than that of Cr6 + (about 1% of Cr6 +) and is easy to deal with [4], the coating obtained by trivalent chromium plating can not replace hexavalent chromium coating and can not completely avoid the pollution caused by Cr6 +. Therefore, the research and development of substitute chromium coating is more urgent.
At present, chromium plating can be divided into three types: alloy decorative chromium coating, alloy hard chromium coating and composite plating.

Send Inquiry