The basic process of plastic water electroplating is as below.
different types of plating, different requirements, and different process flows, but to design a complete electroplating process, three stages must be included:
The first stage: pre-treatment for plating
All processes before electroplating are collectively referred to as pretreatment, including degreasing, removing oxide film, removing rust, cleaning, etc. Its purpose is to remove oil stains, oxide film, rust, etc. on the surface of the workpiece, so that the coating is firmly combined with the substrate, and a coating with good bonding force is obtained.
The second stage: electroplating
Obtaining a variety of coatings that meet the requirements of each link is the core procedure of the entire process. It is a method of laying a layer of metal on a conductor using the principle of electrolysis. Electroplating refers to a surface processing method that uses the base metal to be plated as a cathode in a salt solution containing pre-plated metal to deposit the cations of the pre-plated metal in the plating solution on the surface of the base metal through electrolysis to form a plating layer. . The thickness of each electroplated layer determines the key to each performance test and appearance.
The third stage: post-plating treatment
Including cleaning, hydrogen removal, passivation, sealing, drying, etc., the purpose is to obtain different colors and properties.






