Analysis period of electroplating solution:
The electroplating solution will be consumed in the work, the most important of which is the metal ion component, that is, the consumption of metal ions required for the coating, as well as the consumption of other components. The consumption of these different components cannot be balanced. Therefore, for a new standard plating solution, the composition of the plating solution must have changed after a certain period of work. If it is not replenished in time, the plating solution will not work properly. Because the analysis of the plating solution also consumes a certain amount of resources and cannot be analyzed or tested frequently, it is necessary to make periodic arrangements for the analysis of the plating solution depending on different situations.
The items that are analyzed at least once a day are:
Free cyanide in the copper plating bath
2. The pH value of the nickel plating bath
The analysis items once every 2 days is:
Free compounds in the electroplating bath
The analysis once a week has items:
Determination of Baume degree of the chromium plating bath
2. Determination of sulfuric acid and copper in copper plating bath 3. Determination of nickel in nickel plating bath 4. Determination of chromic acid in the chromium plating bath
The analysis items once every two weeks are:
1. Quantitative analysis of all components of nickel plating solution
2. Determination of sulfuric acid in the chromium plating solution
3. Content analysis of main components of copper plating
The analysis items once a month include:
1. Quantitative analysis of impurities in various plating solutions
2. Quantitative analysis of copper in copper sulfate plating solutions
3. Determination of trivalent chromium in chromium plating solutions and determination of various impurities.






