sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

video

Plating On Plastics-car Parts

product introduction: chrome plated car parts Marterial: ABS Plating color: bright chrome Sample time: 3-5 days Production time: 15-20 days This car parts originally are made by metal, after convert to ABS with chrome plating, which have saved a lot of cost, and also get the metallic decoration...
Send Inquiry

Product Introduction

product introduction: chrome-plated car parts

Material: ABS

Plating color: bright chrome

Sample time: 3-5 days

Production time: 15-20 days


Plastic Electroplating for automobile Parts

1. The application in the peripheral parts of the automobile engine: because the peripheral parts of the engine are mainly heating and vibration components, most of the materials used in the parts are glass fiber reinforced nylon. 

This is because nylon has better comprehensive properties, and the main properties of nylon modified with glass fiber have been greatly improved, such as strength, product accuracy, dimensional stability, and so on. 

In addition, there are many kinds of nylon, easy to recycle, relatively cheap, and so on, which make nylon an ideal material for engine peripheral parts. 

The intake manifold is the most typical application of modified nylon material in the automobile field. In 1990, BMW first applied the intake manifold made of glass fiber reinforced nylon as raw material to a six-cylinder engine. 

After that, the American Ford intake manifold made of glass fiber reinforced PA66 was applied to the V6 engine, and the major automobile companies in the world followed suit, and the modified nylon intake manifold was widely used. 

Because of its excellent heat resistance, impact resistance, rigidity, and good processing fluidity, modified PC is mainly used in automotive parts such as exterior and interior parts, dashboard components, anti-freezing panels, door handles, negative flow plates, brackets, steering column jackets, decorative panels, air conditioning system accessories, lamp parts, and other automotive parts. 

Engine accessories, water tank accessories, air conditioning accessories, air filter accessories, all kinds of kettles, dashboard accessories, seat accessories, floor accessories, roof accessories, shift bar accessories, steering wheel accessories, door interior accessories, rearview mirrors, and various buckle and fixing parts, front and rear lights, intake grille, fender, reversing mirror. 

Do you know what plastic materials are used in a car? 

In the past, cars used steel plate alloy and other materials to make the car body, which is both clumsy and high cost. because plastic has the advantages of beauty, lightweight, easy processing, and so on, it has become an important material for car body manufacturing. 

So what are the common plastics in cars? 

1. PA (nylon). 

Nylon is mainly used in automobile engines and engine peripheral parts, such as reinforced flame retardant PA6 and so on. 

2 、 PBT. 

PBT is widely used in the production of the bumper, carburetor components, fender, spoiler, spark plug terminal board, fuel supply system parts, dashboard, automobile igniter, accelerator and clutch pedal, and other automotive parts. 

The competition between PBT and enhanced PA, PC, and POM in the automobile industry is very fierce. 

3 、 POM. 

The biggest market for the use of POM is the automotive industry. 

POM has the advantages of being lightweight, high hardness, wear resistance, creep resistance, and chemical corrosion resistance. it is commonly used in automobile pumps, carburetor components, oil pipes, power valves, bearings, motor gears, cranks, handles, dashboards, car window lift devices, electric switches, seat belt buckles, and so on. 

Wear-resistant parts are the strengths of modified POM. 

4 、 PC. 

Modified PC is mostly used in the automobile field, which has the characteristics of heat resistance, impact resistance, high rigidity, and high flow. It is often used in automobile exterior decoration parts, dashboard surrounding parts, anti-freezing companions, door handles, brackets, steering column jackets, decorative panels, air conditioning system accessories, lamp parts, and so on. 

Take a look at what plastics are used in our cars. We can't live without plastic everywhere. Almost everything we see, there is plastic. Can you give me some examples?


This car parts originally are made by metal, after convert to ABS with chrome plating, which have saved a lot of cost, and also get the metallic decoration and faution.


What industries benefit most from metal to plastic conversion?

Many of the markets take advantage of the value metal-to-plastic conversion can provide. Applications typically center around metal components that are heavy, or that incorporate multiple manufacturing steps to create desired features.

For example, automotive and aviation industries have utilized metal-to-plastic conversion to reduce weight and improve fuel efficiency (replacing a metal component with a plastic one results in about a 50-percent weight reduction). In addition to reducing weight, components made from engineered plastics can be just as durable, heat-resistant, and chemical-resistant as metal components, making them suitable for harsh environmental or operating conditions.

An increase in metal to plastic conversion is also occurring in the medical device industry. Tools and instruments that were once made of metal are now created from plastic to reduce weight, while still providing a high level of strength and stiffness. When high-temperature plastics are incorporated, components are able to withstand heightened disinfectant and sterilization demands.

Other industry applications that are on the rise for metal to plastic conversion include agriculture, construction equipment, industrial pumps, fluid power applications, heavy equipment, appliances, and many consumer products.


c plastic plating workshopd plastic plating unracking anf finishingplastic chrome plating and nickel plating color card BLTL

Hot Tags: plating on plastics-car parts, China, suppliers, manufacturers, factory, custom, wholesale, buy, made in China

Send Inquiry

(0/10)

clearall